Back
ProfiNet to ModbusTCP
Part No: 700-159-3MB01
.
PN/ModbusTCP-Gateway, PROFINET/ModbusTCP
Simple and uncomplicated connection of a PROFINET network with a ModbusTCP network is possible with the PN/ModbusTCP Coupler. The PN/ModbusTCP Coupler enables data transmission between a PROFINET controller and ModbusTCP participants. Received input data on one of the network sides is made available as output data to the other network side. The IO data transfer takes place live and as quickly as possible without additional handling blocks.
The maximum size of the transmitted data is 1024 bytes input/output data. Up to 300 slots for I/O modules are available via which the PROFINET data can be connected to the ModbusTCP coils, inputs and registers as required. The full ModbusTCP address space of 65536 coils, inputs and registers is supported.
The integration into the PLC engineering tool is made possible by a GSDML file; special configuration software isnt necessary.
In addition to the PROFINET/ModbusTCP communication, the PN/ModbusTCP Coupler also makes an MQTT Publisher available on both network sides. In this way, the values exchanged via the gateway can also be distributed via MQTT to visualization or operating data recording systems.
Features
Very compact design for top hat rail mounting
Redundant power supplies
Galvanic isolation of the networks
Up to 1024 Byte input/output data
300 configurable slots for PROFINET IO data
Supports the full ModbusTCP address space with free assignment of IO data
Supports multiple simultaneous ModbusTCP clients
Configuration just with GSDML file, no additional software required
MQTT Publisher on both network sides (PROFINET & ModbusTCP)
Resource Download
Quick Start Guide
http://www.automationwarehouse.com.au/
manuals/helmholz/PN-ModbusTCP_Coupler_EN_-_V3_Quickstart.pdf